Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Roof Repair in Westchester: What to Know First
PGT roof repair in Westchester typically runs $350 to $1,900 depending on whether we’re sealing a skylight curb, replacing flashing around a vent, or rebuilding the roof-to-wall transition where PGT impact windows and doors tie in. Most jobs take half a day once we’re on site, and we carry the sealants, fasteners, and flashing profiles PGT specifies straight from the manufacturer’s detail sheets. Call (863) 251-5864 to talk it through with a live person. This page is for Westchester homeowners who bought PGT products because they wanted the best wind and water protection Florida can offer, and who now need roof repair work done without compromising that investment.
How PGT Products Fail - and How We Fix Them
- Roof flashing separation at PGT WinGuard window headers. Westchester’s afternoon thunderstorms dump water fast, and the peninsula-style roof overhangs common on 1960s ranch homes near Bird Road direct runoff straight down the wall. Over time, the step flashing above PGT WinGuard window openings lifts from thermal movement in the roof deck. We re-secure the flashing, replace the sealant with a PGT-approved polyurethane, and re-dress the drip edge so water sheds past the frame instead of pooling behind it.
- Skylight curb leaks that read as “roof leaks” but are actually flashing failures. We see this in Westchester constantly: homeowners blame the shingles when the real culprit is a deteriorated curb flashing around a skylight above a PGT sliding glass door. The water travels down the rafter, exits at the door header, and soaks the PGT frame gasket. Our fix addresses the curb flashing first, then dries and re-seats the door gasket so you’re not chasing the same stain next rainy season.
- Roof-to-wall transition gaps above second-story PGT windows on newer construction. Westchester has plenty of 1990s and 2000s two-story builds where the roof deck meets a stucco wall holding PGT impact windows. The original builder often used a thin bead of silicone that hardens and cracks within a decade. We remove the old sealant, install a proper backer rod and two-stage sealant joint, and repaint the flashing to match. This is the repair that stops the “mystery leak” the last two roofing companies couldn’t find.
- Deteriorated fascia and soffit material around PGT door canopies. If your PGT hinged patio door or sliding door sits under a small roof canopy, that canopy’s fascia and soffit are doing the real work of shedding water away from the door opening. In Westchester’s heat and salt air, aluminum fascia corrodes at the corner where it meets the stucco, and water wicks sideways into the door jamb. We replace the corroded section and re-flash the junction properly.
- Tile roof mortar fatigue adjacent to PGT skylights and roof windows. Westchester has a significant number of barrel tile roofs, and the mortar caps around PGT skylight curbs and roof windows break down faster than the tiles themselves. Once the mortar cap is compromised, the underlayment wicks water horizontally. We cut out the failing mortar, reset the curb with fresh mix matched to your roof profile, and re-seat the PGT unit per the manufacturer’s roof penetration detail.
Our PGT Roof Repair Process
- 1
You call, a person answers. No voicemail loops. You describe the symptom; we ask the questions that separate a PGT flashing issue from a roof deck issue before we ever pull up the ladder.
- 2
Free on-site diagnostic. We come out, get on the roof, and trace the water path. If it ties back to a PGT product, we document it. If it’s something else, we tell you that plainly.
- 3
Parts decision: OEM vs. aftermarket. Some PGT components, like gaskets and specific extruded profiles, only come from PGT. Other items, like standard flashing, polyurethane sealants, and fasteners, we source from manufacturers whose specs exceed the original without charging OEM markup for a commodity part.
- 4
The repair. We work in sections, protect your landscaping and driveway, and keep the site clean as we go. If we open a wall, it gets closed and finished the same day.
- 5
Water test and verification. We don’t call a roof repair done until we’ve run water over the repaired area and confirmed it sheds exactly where it’s supposed to. If it doesn’t, we’re not done.
- 6
Documentation and the Done Right Promise. You get a written line-item invoice and our 36500-Day Done Right Promise: if it’s not done right, we make it right. Period.
What PGT Roof Repair Costs in Westchester
Expect $350 to $600 for a standard flashing repair or sealant replacement around a single PGT window or door opening. A skylight curb rebuild with new flashing and sealant typically lands between $700 and $1,100 depending on curb height and roof type. Full roof-to-wall transition work along a second-story PGT window run runs $1,200 to $1,900 because of staging and linear footage. What moves the price: roof pitch, how many roof penetrations are involved, whether we need to open stucco, and whether OEM PGT parts are required. We give you a fixed line-item quote before work starts, and the number on the quote is the number on the invoice. Call (863) 251-5864 for your free estimate.
Why Westchester Homeowners Call Winslow Windows & Doors for PGT Work
Ed Winslow started this company in 2011, and his name has been on every job since. We’re not a national call center with rotating crews. The tech who diagnoses your PGT repair is background-checked, uniformed, and works for us full-time. We carry the full PGT lineup in our service knowledge base, and because Westchester homes also feature CGI, CWS, ES Windows, and ECO Window Systems products, we understand how different manufacturers’ flashing and drainage details interact on the same roofline. And the 36500-Day Done Right Promise means the repair doesn’t end when we pull out of your driveway. It ends when you’re satisfied. A neighbor you can call at 2 a.m., and someone will actually answer.
FAQs
No, as long as the repair uses PGT-compatible sealants and flashing materials and doesn’t alter the window or door frame itself. We follow PGT’s published installation and penetration details on every job, and we document what we use. As an independent PGT service provider, we’re not authorized by PGT, but we work within their spec sheets because we know the product standards matter in Westchester’s wind conditions.
We dispatch within a few days in most cases, and for active water intrusion during storm season, we prioritize those jobs. Call (863) 251-5864 and a live person will give you a straight answer on scheduling, not a next-business-day callback.
Usually not. The leak is typically in the flashing or sealant above the unit, not in the PGT product itself. We fix the roof-side failure first, dry out the frame, and only recommend replacement if the PGT unit has structural damage or failed gaskets, which is rare.
For items that only PGT manufactures, like specific gasket profiles and certain corner joinery components, we order OEM. For everything else, we use materials that meet or exceed PGT’s written specifications, and we’ll show you the spec sheet if you want to see it. Call (863) 251-5864 and we’ll walk you through what your specific repair needs.
Yes. If we come out and the issue is a roof problem unrelated to your PGT product, we’ll tell you that and quote the correct repair. No trip charge inside our home county, no pressure, no invented urgency.
When a Westchester home needs PGT roof repair, the details matter. The flashing angle, the sealant chemistry, the way water travels through a tile roof and finds the weakest opening. We’ve spent 15 years learning those details in this exact climate. Ed Winslow’s name is on the business. That means the job doesn’t end when we pull out of your driveway. Call (863) 251-5864 to schedule your free estimate, and you’ll see why your neighbors keep our number saved.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.