Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Westchester: What to Know First
CGI roof replacement and installation in Westchester costs between $14,500 and $32,000 for a complete roof system, depending on roof size, decking condition, and the CGI product line you choose. Winslow Windows & Doors is an independent CGI service provider, not a factory showroom, which means we give you straight answers about what actually holds up in Westchester’s humidity and hurricane cycles. Most full replacements take 3 to 5 working days once materials land. This page is for Westchester homeowners who own or are considering CGI roofing and want an installer who knows the product line past the brochure. Call (863) 251-5864 for a free estimate and a written line-item quote before you commit to anything.
Key Takeaways
- We install and replace CGI roofing systems as an independent provider, using either OEM or verified aftermarket components where they make sense.
- Westchester’s salt air, afternoon thunderstorms, and hurricane season create failure patterns specific to this area, and we know which CGI lines handle them best.
- Free estimates, written line-item pricing, and the 36500-Day Done Right Promise on every job.
- Ed Winslow’s name is on the business. So is his phone number.
How CGI Products Fail - and How We Fix Them
CGI builds a strong roof, but no roof is immune to South Florida. Here’s what we see in Westchester, week after week, and what we do about it.
- CGI Sentinel Standing Seam: fastener backout on older installs. Westchester’s heat cycles expand and contract the metal panels more aggressively than CGI’s Florida testing assumes when the roof was installed over unvented attics. The fasteners slowly loosen, the panels lift in wind uplift, and you get that flapping sound during storms. We remove the compromised fasteners, inspect the purlin attachment, and re-secure with the correct clip spacing. If the decking underneath is shot, we replace it before the new panels go down.
- CGI Barricade Tile: underlayment failure before the tile shows damage. Tile roofs in Westchester often fail from the inside out. The concrete or clay tile looks fine from the curb, but the underlayment beneath is disintegrating, usually around the Bird Road and Palmetto corridor homes built in the 70s and 80s. By the time you see a water stain on the ceiling, the underlayment has been leaking for months. We lift the existing tile, replace the underlayment with a high-temp peel-and-stick system rated for South Florida, and reset the salvageable tile.
- CGI Heritage Shingle: granule loss accelerated by Westchester’s afternoon downpours. The Heritage line is a solid architectural shingle, but the constant cycle of UV blast followed by a 20-minute monsoon wears the top coat faster here than in most of Florida. Granules collect in the gutters after every rain. We document the condition of the shingle deck, check for soft spots at the valleys and penetrations, and if the decking is sound, we can sometimes do a targeted replacement rather than a full tear-off. Honest read, either way.
- CGI armor panel systems: improper flashing at roof-to-wall transitions. A lot of Westchester homes have flat or low-slope sections where the roof meets a second-story wall. The original flashing gets installed short or without proper kickout, and water tracks behind the stucco. We see this on CGI armor panel installs done by crews that aren’t local and don’t know how Westchester homes are built. We cut out the failed flashing, inspect the wall framing, and install step flashing with proper counter-flashing and a kickout diverter.
- CGI Dolphin tile systems: cracked tiles from foot traffic and windborne debris. The Dolphin line is lighter than many competitors, which is good for your trusses, but it means repeated foot traffic breaks tiles faster. Westchester tree cover doesn’t help in hurricane season. We swap cracked tiles with color-matched replacements, or if the field is too far gone, we do a full roof replacement and recommend the right walk path strategy so the new roof doesn’t get the same treatment.
Our CGI Roof Replacement & Installation Process
Here’s how a CGI roof job runs, start to finish, when you call Ed’s crew.
- 1
Call and speak to a person. You call (863) 251-5864. A live human answers. We book a time that works for you, and there’s no trip charge inside our home county.
- 2
Roof assessment and honest diagnosis. We get on the roof. We look at the CGI product you have, the decking under it, the flashing, the ventilation, and the drainage. We’re checking for the failures listed above as well as anything else the roof is telling us.
- 3
Written line-item quote. You get a real document with material costs, labor, permit fees if required, and the disposal line explicitly spelled out. No “miscellaneous” padding, no change order that comes out of nowhere later.
- 4
Parts decision: OEM or verified aftermarket. For some CGI repairs, the OEM part is the right call. For others, a quality aftermarket component does the same job at a fairer price. We lay out both options, explain the warranty implications of each, and you decide. You’ll never get an aftermarket part disguised as OEM.
- 5
Replacement or repair with Westchester code in mind. Our crew tears off, repairs, or installs according to the product line and the current wind-load requirements for Westchester. We don’t skip underlayment. We don’t reuse flashing that should have been retired a decade ago. We don’t hide shortcuts under new roofing material.
- 6
Final inspection and the 36500-Day Done Right Promise. Before we leave, we walk the roof with you. We show you what we did, where the warranties live, and what to watch for during the next hurricane season. If it’s not done right, we come back. That’s not a sales line. Ed’s name is on the business. That means the job doesn’t end when we pull out of your driveway.
What CGI Roof Replacement & Installation Costs in Westchester
Here are honest, street-level numbers for the CGI work we do most often in Westchester. These are ranges, not quotes. Your roof size, slope, decking condition, and product choice move the number.
- Full CGI Sentinel standing seam replacement: $19,000-$32,000 depending on square footage and decking replacement.
- Full CGI Heritage shingle replacement: $14,500-$24,000 including tear-off and underlayment.
- CGI roof repair (targeted, not full replacement): $650-$3,800 depending on scope. Most flashing and fastener repairs land under $1,600.
- Tile reset and underlayment replacement (Barricade or Dolphin): $11,000-$21,000 when the tile itself is salvageable.
- Decking repair before new CGI install: $75-$140 per sheet, depending on the material and how much is rotted.
What moves the price most in Westchester is decking rot. Homes along Bird Road and the Palmetto with original sheathing from the 60s and 70s frequently need partial or full decking replacement once we get the old roof off. We can’t see that from the curb, which is why we give you a written range up front and show you the rot with photos before we spend a dollar of your money. Call (863) 251-5864 for a free estimate. We’ll measure, inspect, and hand you line-item numbers the same day.
Why Westchester Homeowners Call Winslow Windows & Doors for CGI Work
We’ve been in business since 2011, and we’re not a national chain with a rotating cast of subcontractors. Ed Winslow is local. He was born and raised in Miami, and Westchester has been his crew’s backyard for years, from the quiet cul-de-sacs near Bird Road to the older ranch homes off the Palmetto. When you call, a live person answers at any hour, not a voicemail tree. When a tech shows up, that tech is background-checked and in uniform, and you’ll know exactly who’s on your property before the truck door opens.
We’re authorized installers for eight premium brands: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That matters when your CGI roof replacement intersects with windows or doors, because one crew can handle the whole envelope. And the 36500-Day Done Right Promise means the roof is right or we come back. That’s not a warranty with fine print that evaporates. That’s a century-long standard. That’s Ed’s word.
We offer a permanent 10% discount for seniors and veterans, $40 off any repair over $200, and free second opinions on written estimates. No trip charge inside our home county. Upfront pricing. No surprises on the invoice.
FAQs
If you use unapproved materials or installers who don’t follow the system specifications, it can. We follow the installation requirements for each CGI product line, and we document every step. When an OEM part is the warranty-safe call, we tell you. When an aftermarket part works just as well without risking the warranty, we tell you that too, and we show you why. Call (863) 251-5864 and we’ll give you a straight read on your specific roof’s warranty status before any work starts.
Most full replacements run 3 to 5 working days once materials are on site. Tile systems take a little longer than shingle or standing seam because of the reset process. Weather delays happen, especially in hurricane season, but we don’t stretch a four-day job into two weeks. You’ll know the schedule before the first truck rolls up. For an exact timeline on your roof, call (863) 251-5864.
In most cases, yes. For current CGI product lines like Heritage, Barricade, and Dolphin, color options are still available. For discontinued series on roofs installed 15 or more years ago, we can usually source close-match aftermarket options or blend replacement sections so the repair doesn’t look like a patch. We’ll show you samples before anything gets fastened down. Call (863) 251-5864 and we’ll check color availability for your specific CGI line.
If the decking is sound and the failure is isolated to flashing, fasteners, or a small area of material, a targeted repair is usually the honest call. If the decking is rotted, the underlayment is failing across the roof, or the existing CGI panels have widespread fastener backout, a full replacement costs less in the long run than chasing repairs every season. We’ll show you photos from the roof so you can see exactly what we’re seeing. Call (863) 251-5864 for a free assessment with no obligation to move forward.
Yes. When your job requires a permit, we pull it, schedule the inspection, and make sure it passes before we close out the job. You’ll get a copy of the passed inspection for your records. That’s part of the 36500-Day Done Right Promise. Call (863) 251-5864 with your address and we’ll tell you whether your specific job needs a permit and what the inspection process looks like.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.