Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterMr-Glass Roof Replacement & Installation in Westchester: What to Know First
Mr-Glass roof replacement and installation in Westchester runs $8,500 to $22,000 for a typical single-family home, with most jobs landing between $11,000 and $16,000. We complete the majority of tear-offs and new installations in 2 to 4 working days, depending on roof size, pitch, and whether the existing decking needs repair. We work as an independent Mr-Glass service provider, which means we’re free to tell you exactly what your roof needs without a corporate sales quota hanging over the conversation.
If you own a home in Westchester and your Mr-Glass roof is aging, leaking, or storm-damaged, this page tells you what to expect before anyone climbs a ladder. Call (863) 251-5864 and you’ll get a live person, not a voicemail loop. Ed Winslow answers for the work we do, and he’s been doing it in this neighborhood since 2011.
How Mr-Glass Products Fail - and How We Fix Them
- Seam separation at the ridge line. Mr-Glass standing seam panels can pull apart at the ridge cap after years of thermal expansion and contraction. Westchester’s afternoon heat followed by evening thunderstorms cycles roof metal harder than most climates. We see gaps open up that let water track under the cap, and by the time a homeowner spots a ceiling stain, the underlayment is already saturated. The fix is a full ridge cap reset with new closure strips and fasteners, not a caulk-and-pray patch.
- Fastener back-out on older Mr-Glass panel runs. Certain Mr-Glass installations from the mid-2010s used gasketed screws that lose their washer seal after repeated heating cycles. You’ll see screws backed out a quarter inch with cracked rubber gaskets. The real risk isn’t the exposed fastener, it’s water wicking into the decking through the unsealed hole. We replace every fastener with upgraded stainless hardware and inspect the decking underneath before reinstalling panels.
- Underlayment degradation beneath Mr-Glass tile profiles. Mr-Glass tile-look metal roofs hide a common problem: the synthetic underlayment breaks down long before the visible tile profile does. Homeowners see a roof that still looks sharp and assume everything underneath is fine. In Westchester’s humidity, we regularly find underlayment that’s turned brittle and cracked, especially on roofs with low attic ventilation. A full replacement means stripping the panels, replacing the underlayment, and reinstalling or replacing the Mr-Glass profile depending on its condition.
- Improper original flashing around chimneys and skylights. A lot of Mr-Glass roofs in Westchester were installed by crews who cut corners at roof penetrations. Short kick-out flashing, missing step flashing, or caulk-only seals at the chimney base fail within five to seven years. We rebuild the flashing detail with proper counter-flashing and plumbing-boot replacements, then water-test the penetration before we call the job done.
- Dented or creased panels from hurricane debris. After a strong storm, Mr-Glass panels can take impact damage that looks cosmetic but isn’t. A creased panel is compromised along the bend line, and repeated heavy rain will eventually find a pinhole. Matching a single Mr-Glass panel color in Westchester is hit or miss depending on the line’s age and whether the original color formula is still in production. We’ll tell you honestly if a color-matched repair is possible or if you’re better off replacing the affected slope entirely.
Our Mr-Glass Roof Replacement & Installation Process
- 1
The call and the walkthrough. You call (863) 251-5864, we schedule a time that works for you, and Ed or one of our senior techs walks the property with you. We look at the roof surface, the attic, and the existing flashing before opening our mouths about price.
- 2
Straight diagnosis. We tell you what’s actually failing, what can be repaired versus what needs replacement, and whether your Mr-Glass panels have life left in them. No scare tactics, no invented urgency.
- 3
The written estimate. You get a line-item quote with every cost spelled out: tear-off, disposal, decking repair if needed, underlayment, panels or tiles, flashing, and labor. Upfront pricing, no change-order games.
- 4
The work. We tear off the old roof, repair or replace damaged decking, install proper underlayment, then install the Mr-Glass system with the correct fasteners, closures, and flashing details. Our crew is background-checked and uniformed, and we don’t subcontract your roof to a crew we’ve never met.
- 5
The test and the walkthrough. Before we pack up, we water-test penetrations and walk the entire roof surface. Then Ed or the lead tech walks you through what was done and answers anything you want to know.
- 6
The guarantee. Every job carries the 36500-Day Done Right Promise. If it’s not done right, we come back and make it right. That’s not a punchline; it’s how Ed has run this company since day one.
What Mr-Glass Roof Replacement & Installation Costs in Westchester
Here’s the honest math for Westchester homes, based on what we’ve quoted and installed in this market over the last several years:
- Full Mr-Glass panel roof replacement (1,800-2,400 sq ft home): $11,000-$18,000 depending on panel gauge, profile, and trim complexity
- Full Mr-Glass tile-look replacement: $13,500-$22,000 due to the heavier profile and slower installation
- Decking repair (per 4×8 sheet replaced): $70-$110 including material and labor
- Chimney or skylight flashing rebuild: $450-$900 per penetration
- Ridge cap reset on an existing Mr-Glass roof: $600-$1,400 depending on ridge length
What moves the price: roof pitch and accessibility, number of penetrations, condition of the decking, and whether you’re replacing panels or going with the tile profile. Low-slope sections that need extra waterproofing also add cost. The estimate we give you is the price you pay, period. Call (863) 251-5864 for an exact quote, it’s free and it comes from someone who’s actually been on a roof this week.
Why Westchester Homeowners Call Winslow Windows & Doors for Mr-Glass Work
We’ve been in Westchester since 2011, and Ed Winslow’s name is on the business, on the truck, and on every invoice. A neighbor can call at 2 a.m. and a real person answers, not a call center in another state. Our techs know Mr-Glass roofs because they’ve torn them off, reinstalled them, and repaired enough of them to know where they fail before the homeowner does. And because we’re authorized installers for PGT, CGI, CWS, and ES Windows as well, we’re not trying to force you into a brand that doesn’t fit your house. We’re the one down the road, which means if something isn’t right, you’ll find us at the same address tomorrow.
FAQs
Yes, having a non-authorized contractor perform a full replacement will typically void whatever coverage remains on the original Mr-Glass installation. That’s the trade-off, and we’ll be upfront about it. The manufacturer’s warranty is tied to the original installation, not to the materials themselves. Before we tear anything off, we’ll tell you exactly what warranty remains and whether a targeted repair, which may preserve more of the original coverage, is the smarter move.
Most Mr-Glass roof replacements in Westchester take 2 to 4 working days from tear-off to final inspection. Longer if the decking is in bad shape or if the roof has a complicated pitch. We schedule the job before we show up, and the crew stays until it’s done, not until the next job is waiting. Call (863) 251-5864 to get a timeline for your specific roof.
Sometimes. If your Mr-Glass roof is less than 10 years old and the color formula is still in production, a close match is usually possible. If the panels have faded for a decade in the Westchester sun or the line has been discontinued, an exact match won’t happen, and we’ll tell you that before you spend money. In cases where a seamless match isn’t possible, replacing the entire slope is the better long-term call.
For structural components and panels, we use genuine Mr-Glass materials whenever they’re available. For fasteners, underlayment, and flashing, we often recommend upgraded aftermarket components that outperform the originals, especially in Westchester’s humidity and storm exposure. We’ll always tell you what’s going on your roof and why, and the estimate itemizes every material by name.
If the panels themselves are still sound and the failure is in the underlayment or flashing, a replacement with new Mr-Glass panels is often the most cost-effective path, since the existing roof’s framing and layout are already configured for it. But if you’re looking at widespread panel failure, we’ll show you how Mr-Glass stacks up against the other lines we install, including PGT and CGI, so you can make the call with real numbers. The estimate is free either way, call (863) 251-5864 and we’ll go over it on the roof, not over the phone.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.