Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Picture & Fixed Windows in Westchester, FL | Winslow Windows & Doors
Picture and fixed windows give you the cleanest possible view of your property, and in Westchester that view matters. These are non-operable laminated impact glass panels built to hold their ground in a hurricane without making you sacrifice a single degree of sightline. Homeowners across Westchester choose them for great rooms, stairwells, and any wall where light matters more than ventilation. Winslow Windows & Doors has installed impact-rated picture windows throughout this community for years, and we handle every job from the first measurement to the final water test. Call (863) 251-5864 to talk about your project.
Product Overview - Picture & Fixed Windows
A picture window is exactly what it sounds like: a large, stationary pane of glass that frames the outdoors like artwork on a wall. Fixed windows serve the same role in smaller openings, or they fill the gaps in a larger window wall. Neither one opens. That’s the point. Without sashes, tracks, or moving hardware, the glass area stays unobstructed, and the frame can carry more glass than an operable unit of the same rough opening could.
In hurricane-prone construction, that non-operable design is also an advantage. A fixed frame is inherently more stable than one with moving panels, and when you pair it with laminated impact glass, you get a unit that works with the building envelope instead of against it. Many Westchester homeowners put a large picture window in the center of a living room wall and flank it with operable casements or single-hung units on either side. That layout delivers the best of both worlds: a wide, uninterrupted view in the middle, airflow at the edges, and impact protection across the whole assembly.
Winslow Windows & Doors supplies and installs picture and fixed impact windows in aluminum and vinyl through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. Each project gets a specific configuration matched to your opening size and wind zone, so you’re never paying for a rating you don’t need and never left short of the one you do.
Technical Specifications
Here’s what you can expect from our picture and fixed window configurations in Westchester:
| Specification | Details |
|---|---|
| Frame Materials | Aluminum, Vinyl |
| Maximum Width | Up to 120 inches |
| Glass Options | Laminated Impact Glass (PVB Interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass |
| Finish Colors | White, Almond, Bronze, Black, Tan |
| Operation | Non-operable (fixed) |
Maximum panel width on our picture configurations reaches 120 inches, though the practical limit for your opening depends on frame material, wind zone, and structural load. Aluminum frames carry the largest spans and suit Westchester’s modern and mid-century homes. Vinyl offers a softer profile at a friendlier price point, and it handles coastal air well. Your quote includes every spec relevant to your specific window, written out line by line.
Hurricane & Compliance Performance
Laminated Impact Glass
The core of this product is a PVB (polyvinyl butyral) interlayer sandwiched between glass. Under impact, the glass may crack, but the interlayer holds the pane in the frame, keeping wind and debris on the outside where they belong.
Miami-Dade NOA / Florida Product Approval
Every configuration carries approval documentation. Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers are issued per configuration, which means the exact number on your window depends on its size, frame, and glass package. We verify and include this on your specific quote.
FBC / High-Velocity Hurricane Zone Compliance
These units are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. That’s the strictest standard in the state, and Westchester sits squarely inside the territory where it applies.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. A picture window that carries these approvals has been pushed hard in a lab, not just on paper.
Design Pressure Matched to Your Wind Zone
We order design pressures matched to your specific wind zone, up to +/-100, never higher. No homeowner in Westchester should pay for a rating that exceeds what their elevation and exposure actually require.
Energy Performance Options
Low-E and insulated glass packages are available for any picture or fixed window we supply. In a South Florida climate, Low-E coatings cut solar heat gain on east and west exposures, and insulated glass helps manage interior comfort year-round.
Color & Glass Options
White and almond remain the two most popular finishes for Westchester homes, and for good reason. Both colors sit naturally against the Mediterranean Revival and ranch-style homes common across the area. Bronze and black give you a sharper, more contemporary line, especially on homes with darker roof profiles or modern stucco palettes. Tan bridges the middle, pairing well with natural stone accents and wood soffits.
On the glass side, clear laminated impact glass gives the truest view and is the right choice for a picture window whose whole job is scenery. Tinted glass knocks down glare and heat on east- and west-facing walls without a heavy film look. Low-E insulated glass adds a thermal barrier and works best when comfort and energy management matter as much as the view. A common Westchester combination is tinted or Low-E glass on the afternoon side of the house and clear glass where the light is softer.
Installation by Winslow Windows & Doors in Westchester
Buying a hurricane-rated picture window is half the job. Installing it correctly is the other half, and this is where the NOA rating either means something or it doesn’t. A window can pass every TAS test in a laboratory and still leak or fail in a storm if it’s set out of square or sealed with the wrong materials. That’s why we treat every installation as a system, not a glass swap.
We start with a pre-install inspection of the rough opening. In Westchester that means checking for water intrusion behind the existing frame, evaluating the condition of the header and king studs, and verifying the opening dimensions against the window that was ordered. Then we set the unit level, plumb, and square, anchored per manufacturer and code requirements. We follow AAMA 2400 and 2410 installation practice, the recognized standard for window installation in hurricane zones. Our perimeter sealing uses AAMA 812 low-expansion foam, which fills the gap without bowing the frame, plus exterior sealant that blocks driving rain.
After every install we run a water test and walk the interior and exterior with the homeowner. We’re also familiar with HVHZ permitting in Westchester and adjacent jurisdictions, so the approval paperwork moves without surprises. Improper installation compromises the NOA-rated system, voids the manufacturer’s stance on performance, and leaves your wall open to damage in the next storm. This is a job where cutting corners has visible, expensive consequences.
Frequently Asked Questions - Picture & Fixed Windows
What wind zone / design pressure is the Picture & Fixed Windows rated for?
We match design pressure to your wind zone, up to +/-100, never higher. Your specific rating is determined by opening size, frame material, and the elevation of your home in Westchester, and we verify it on your written quote.
What is the lead time?
Lead time varies by manufacturer line and configuration. When we quote your project, we include the current production window for that specific unit so you can plan around it.
Does it require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes. HVHZ permitting in Westchester requires the approval documents specific to your configuration. We provide the NOA and Florida Product Approval numbers for your exact window on the quote and submittal package.
Can I customize the size or configuration?
You order to your opening. Picture and fixed windows are manufactured to the dimensions and glass packages we specify together. Up to 120 inches wide in the right frame material, with glass and finish options selected per opening.
How do I maintain the frame?
Wash the glass with a mild soap and soft cloth. Rinse the perimeter track area and weep holes with clean water twice a year, or after a heavy storm, so drainage stays clear. Run a visual check of the perimeter seals once a year. If anything looks off, call us at (863) 251-5864 and we’ll come take a look.
Get a Quote - Picture & Fixed Windows in Westchester
If you’re planning a new build or replacing windows in Westchester, let’s talk through your openings. We’ll spec the right picture window for your wind zone, walk you through glass and finish options, and give you a written line-item quote. Call (863) 251-5864 to schedule a free on-site measurement or start your project.
Written by the team at Winslow Windows & Doors, serving Westchester, FL.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images










Before
After
Before
After
Before
After