Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Impact Garage Doors: The Westchester Owner’s Guide
Replacing a CGI impact garage door in Westchester typically runs $2,800 to $6,500 installed, depending on the series, size, and whether you need a new opener or track assembly at the same time. We stock CGI-compatible hardware and panels for most of the door models CGI has sold in Florida over the last 15 years, and most homeowners call us after a storm reveals a cracked panel, a bent rail, or a door that groans so loudly the neighbors look over. If you own a CGI door and something is off, the fix usually starts with identifying the exact series and hardware generation before buying anything.
Key takeaways:
- CGI impact garage doors are built to Miami-Dade standards, and their parts are not always interchangeable with generic big-box hardware.
- Most Westchester homes with CGI doors were built after 2005, so we know which models and track types show up in this area.
- We’re an independent installer and repair shop. We are not affiliated with CGI, but we work on their products every week.
- You can call (863) 251-5864 any hour, and a live person answers. That’s Ed’s standard, not a marketing line.
Which CGI Models This Applies To
CGI has built impact-rated garage doors under a few main lines over the years, and the hardware requirements shift from one to the next. In Westchester, we mostly see the ArmorTech series on newer builds and the Estate and Classic lines on homes from the mid-2000s through about 2015. If you’re unsure what you have, look for the metal tag riveted to the inside of the door panel near the bottom corner, or check the top of the track bracket. The tag gives you the series, the door width and height, and a production code we can use to match hardware precisely.
One compatibility gotcha we run into constantly: CGI doors use a heavier-gauge torsion assembly than standard Florida summer-build garage doors, because the panels themselves weigh more. If a previous owner or a handyman swapped in generic springs or cables from a hardware store, the door may open, but the balance is off, the opener motor works harder than it should, and the cables wear out in two or three years instead of ten. We always verify the torsion shaft diameter and the drum profile before quoting replacement springs, because a mismatch there is the single biggest cause of repeat failures we see in Westchester garages. OEM CGI hardware is the safest bet for warranty and balance; quality aftermarket equivalents can work, but only when the specs match exactly, and we never guess on this.
Signs Your CGI Impact Garage Door Is Failing
- The door groans or shudders when it moves. This usually points to worn rollers, a dry torsion tube, or panels that have shifted out of alignment. On CGI doors, the weight means we often find the issue is a roller bracket that has loosened against the impact-rated frame. Catch it early and it’s a $200 to $400 fix, not a full door replacement.
- One side closes faster than the other. That’s a cable or spring tension problem. Impact doors have reinforced track legs, so when one side drops first, it’s rarely the track itself. It’s almost always a frayed cable on the heavy side or a torsion spring that lost tension. Do not try to re-tension CGI springs without the right rods and bracketing.
- You can see daylight through a crack in a panel. Any breach in an impact-rated panel means the door is no longer doing its rated job. In Westchester, that’s a security issue and a storm-prep liability. Panels can be replaced individually on many CGI models, but the new panel has to match the old one’s reinforcement profile, not just its color and width.
- The opener runs, but the door barely moves. This is the classic broken-spring symptom. The motor is working, but the door’s weight is now fully on the opener because the torsion system failed. Disengage the opener and call us before somebody burns out a $400 motor trying to force it.
- The bottom edge is soft or weathered and you feel air at the threshold. The bottom seal and the impact-rated astragal take abuse from South Florida heat and afternoon downpours. Once the rubber compresses or tears, you get water intrusion, leaves, and lizards. It’s a quick, low-cost fix, but ignoring it lets water sit on the track hardware, which accelerates corrosion on the bolts and brackets.
Replacement Cost & What’s Included
In Westchester, the installed cost for a full CGI impact garage door replacement breaks down like this:
- Single-car CGI impact door, base model: $2,800 to $3,600 installed
- Double-car CGI impact door, standard series: $3,600 to $4,900 installed
- Double-car CGI impact door, heavy-reinforced or custom: $4,900 to $6,500 installed
- New torsion spring set, CGI-spec matched: $280 to $520 installed
- New cable set and bearings: $180 to $340 installed
- Single impact panel replacement, matched to existing door: $400 to $900 installed
What drives the range: door width and height, wind-load rating, whether the existing track and hardware can be reused, and whether your opener needs to be re-mounted or replaced to handle the door’s weight class. Every quote from us is a written line-item price before any work starts. The price on the quote is the price on the invoice, period. All replacement hardware and labor carry our workmanship warranty, and Ed’s 36500-Day Done Right Promise stands behind the whole job. Call (863) 251-5864 and we’ll give you a real number, not a ballpark.
DIY or Call Us?
On a CGI impact door, there are a few things worth checking yourself: look for visible cable fray, run your hand along the bottom seal to feel for cracks, and watch the door open once with the opener disengaged to see if it rides smooth or hesitates. Those checks cost nothing and help you describe the problem accurately when you call.
But torsion springs, cables under load, and anything involving the spring anchor bracket are genuinely dangerous. These assemblies are under thousands of pounds of tension, and if a winding bar slips, the injury is serious. We’ve reopened doors in Westchester where a homeowner started a spring job and stopped because the bar bent. That’s the right instinct. We carry CGI-spec springs, drums, cables, and rollers on the truck, so call (863) 251-5864 and we’ll diagnose it in one visit and usually have the parts on hand to finish the same trip.
FAQs
With proper balance and annual hardware checks, a CGI impact door in South Florida routinely lasts 15 to 20 years. The panels hold up well, but springs last 7 to 10 years, and bottom seals need replacing every 3 to 5 years in our heat and rain. We see plenty of original CGI doors in Westchester still in good shape after 15 years, with the hardware replaced once or twice.
Yes, in most cases we repair rather than replace. Springs, cables, rollers, panels, seals, and opener compatibility are all repairable. Full replacement only makes sense when the panel cores are cracked in multiple places, the door is no longer rated for the wind zone, or the track system has been bent beyond safe alignment. Call (863) 251-5864 and we’ll tell you straight which path makes sense for your door.
Most spring, cable, or roller replacements on a CGI door take 60 to 90 minutes once we’re on site. A single panel replacement typically takes two to three hours because the door has to be rebalanced and aligned after the panel goes in. We arrive with the parts loaded based on your initial call, which saves a second trip.
We stock the most common CGI-spec torsion springs, drums, cables, rollers, and seals on our truck, plus panel material for many of the series we see in Westchester. If your door needs something outside the usual stock, we order it directly and give you a real arrival date, not a vague “whenever it shows up.” We also carry parts for PGT, CWS, and ES Windows garage door lines.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
My name’s on the business. That means the job doesn’t end when we pull out of your driveway. Call (863) 251-5864 for your free estimate on CGI impact garage door parts or full replacement in Westchester. A real person answers.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.