Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCWS Shingle, Tile & Metal Roofing in Westchester: What to Know First
Independent CWS shingle, tile & metal roofing service in Westchester typically runs $350 to $1,900 depending on whether we’re repairing isolated damage or replacing whole sections, and most jobs are completed within one to three days once parts are in hand. We’re not affiliated with CWS, but we’ve worked on enough of their systems across Westchester to know exactly how they age in this climate, and our quotes are always free and line-itemed before any work begins. If you own a CWS roof and something’s leaking, lifting, or just not looking right, this page covers what’s actually going on and what it costs to fix. Call (863) 251-5864 and a real person picks up, day or night.
How CWS Products Fail - and How We Fix Them
- CWS Ultra-Lok shingle seal delamination during humid-season thermal cycling. Westchester’s wet summers plus intense afternoon sun cause the adhesive strip on CWS shingle lines to break down faster than the shingle itself, which shows up as tabs flapping after wind events. We reseal with a high-bond adhesive rated for South Florida humidity rather than just nailing tabs down, because nails alone leave the next storm an invitation.
- CWS tile profile stress cracks at the nail line. CWS tile systems with low-profile contours tend to develop hairline cracks right where the fastener penetrates, especially on homes along the Bird Road corridor where roof decks run hot all afternoon. We catch these during routine inspections and swap the cracked tile before water reaches the underlayment, which is always cheaper than chasing a leak that’s already spread.
- Metal panel end-lap gasket rot along ridge terminations. CWS metal roofing with standing-seam profiles relies on butyl gaskets at panel overlaps, and after ten-plus years in Westchester’s salt-tinged air, those gaskets dry out and lose compression. We replace them with marine-grade butyl tape cut to the exact panel profile, restoring the water seal without disturbing the CWS panel clips.
- Flashing detail failures around penetrations and valleys. On both CWS tile and metal roofs, the factory flashing details are the first point of failure if the original install was rushed. We’ve reflashed enough CWS valleys in older ranch homes off the Palmetto to know the common shortcuts, and we rebuild those junctions with a primary and secondary water barrier so the next storm is a nonevent.
- Underlayment saturation beneath the CWS surface layer. This is the silent killer in Westchester, especially after two or three hurricane seasons. The visible CWS shingle, tile, or metal can look fine while the felt or synthetic underlayment below is soaked. We lift a section during every estimate to check what’s underneath, because the surface rarely tells the whole story.
Our CWS Shingle, Tile & Metal Roofing Process
Here’s how a CWS job runs when you call Winslow Windows & Doors in Westchester:
- 1
Call and talk to a person, not a menu. You reach a live dispatcher 24/7 at (863) 251-5864. We get your address, your CWS roof type, and a description of what’s wrong.
- 2
On-site diagnostic at the published address. A uniformed, background-checked tech drives to your Westchester home, walks the roof, and documents the specific failure with photos you’ll see before any work is approved.
- 3
Parts decision you can follow. We tell you whether OEM CWS components are necessary for your warranty to remain intact, or whether a quality aftermarket equivalent will perform just as well for less. No mystery substitutions, ever.
- 4
Line-item quote before any work starts. You get written pricing with each material and labor cost separated. If the final invoice exceeds the quote, that’s our error, and we eat it, not you.
- 5
Repair or replacement by a tech who knows CWS. The work gets done right the first time, with the correct fasteners, sealants, and detailing for CWS profiles in Westchester’s climate.
- 6
Water test, photo documentation, and the 36500-Day Done Right Promise. We test the repaired area for leaks, show you the finished work, and stand behind it for 36,500 days. If it’s not done right, we come back and make it right. Period.
What CWS Shingle, Tile & Metal Roofing Costs in Westchester
For CWS systems in Westchester, here are honest ranges based on the jobs we see most often:
- Single shingle tab reseal or replacement: $350 to $550 depending on access and the extent of surrounding seal breakdown.
- Cracked or slipped CWS tile replacement (one to five tiles): $450 to $950 including matching underlayment repair if the damage has reached below the surface.
- Metal panel gasket replacement along ridges or end laps: $600 to $1,400 depending on linear footage and whether we need to remove and re-seat panels.
- Valley or penetration flashing rebuild: $800 to $1,900 with primary and secondary barrier layers and new CWS-compatible flashing.
What moves the price most is how long water has been traveling under the surface. The earlier you call, the less the repair costs, it’s that simple. Every estimate is free, and seniors and veterans always save 10%. Call (863) 251-5864 and we’ll walk the roof with you before we quote a dime.
Why Westchester Homeowners Call Winslow Windows & Doors for CWS Work
Because the name on the business is the same name that answers for the work. Ed Winslow started this company in 2011, and he’s been walking Westchester rooftops long enough to know which CWS failures are real and which ones a sales sheet exaggerates. Our techs are background-checked, in uniform, and they show up when they say they will. And if you own other products from PGT, CGI, ES Windows, or ECO Window Systems, the same crew can handle those too, so you’ve got one accountable local team for the whole exterior. That’s not convenience for the sake of a brochure. That’s having a neighbor with the tools, the know-how, and a truck parked up the road.
FAQs
No, as long as the repair uses either OEM CWS components or an approved equivalent and is performed by a properly licensed contractor. We document every part we use and every step we take, so if a CWS warranty question ever comes up, you’ve got a clear paper trail showing the repair met warranty standards.
Same week in most cases, often same day for active leaks, because we keep a full service inventory of common CWS fasteners, sealants, gaskets, and flashing profiles stocked locally, and if a specialty CWS part needs to be ordered, we’ll tell you the exact timeline before you approve anything. Call (863) 251-5864 and we’ll give you a straight answer today.
If the CWS surface layer is intact and the underlayment is dry, repair is almost always the right call and the cheaper one. If we lift a shingle or tile and the underlayment below is saturated or crumbling, replacement becomes the honest answer, even if the surface still looks fine. We’ll show you photos of what we find and let the roof’s actual condition drive the recommendation.
Yes. CWS has cycled through several shingle and tile profiles over the years, and some are no longer in production. We source discontinued pieces through our supplier network when they’re available, and when they’re not, we match the closest compatible profile and document the substitution so your warranty position stays clear.
No, we don’t. There’s no trip charge inside our home county, and the estimate itself is free. If you already have a written estimate from another contractor, bring it and we’ll give you a free second opinion on it. The point is to help you make the right call, not to collect a fee for looking.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.