Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterMr-Glass Shingle, Tile & Metal Roofing in Westchester: What to Know First
We provide independent Mr-Glass shingle, tile and metal roofing service throughout Westchester, with most repair jobs completed in one visit and full replacements typically scheduled within one to two weeks depending on material availability. Our pricing is honest and upfront: you’ll get a written line-item quote before any work begins, never a vague verbal estimate. If you own a Mr-Glass product in Westchester and need shingle, tile or metal roofing work done, call (863) 251-5864 and a live person answers, day or night.
This page is for Westchester homeowners who already have Mr-Glass roofing and want someone who actually understands how these systems age in our specific climate. We’re not a Mr-Glass dealer and we don’t pretend to be. As an independent Mr-Glass service provider, we can tell you what the manufacturer won’t always put on a spec sheet: how their materials hold up under South Florida sun after five, ten, fifteen years and what to do when they start to fail.
Key Takeaways
- Independent Mr-Glass service for shingle, tile and metal roofing in Westchester, with free written estimates
- Owner-operated by Ed Winslow since 2011, with a published address and license number
- Every repair backed by the 36500-Day Done Right Promise: if it’s not done right, we make it right.
- Call (863) 251-5864 and a real person picks up, 24 hours a day
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass builds a solid product, but every roof system has weak points, and we see the same failure patterns repeat across Westchester neighborhoods. Here’s what actually happens to Mr-Glass shingle, tile and metal roofing over time, and what we do about it.
- Sealant failure at metal panel seams - On Mr-Glass metal roof panels, the factory-applied sealant along the overlap seams breaks down under constant UV exposure. We see this most often on Westchester homes built between 10 and 15 years ago. The symptom is a slow drip that shows up as water staining on the ceiling near exterior walls, often months after rain. We strip the old sealant, re-tool the seam, and apply a marine-grade sealant rated for South Florida’s thermal cycling. It’s a repair most handymen miss because it looks fine from the ground.
- Tile underlayment deterioration - Mr-Glass tile roofs rely on the underlayment, not the tile itself, to keep water out. In Westchester’s humidity, underlayment on older Mr-Glass installations can break down faster than the tile above it. The tile looks perfect. The fastener holes and flashing points are where water intrudes. We pull the affected tile, replace the underlayment at the failure point, and reset the tile with fresh fasteners. If the underlayment is failing in multiple sections, we’ll tell you honestly and give you a per-section replacement cost rather than patching it for another year.
- Valley flashing corrosion on shingle systems - Mr-Glass shingle roofs use metal valley flashing that channels water where roof planes meet. Over time, leaf debris sitting in Westchester valleys traps moisture and accelerates corrosion. Once the flashing rusts through, water runs under the shingles and follows the roofline. We inspect valleys first on every Mr-Glass shingle call because it’s the most common leak source we find in this area. Our fix is a full valley replacement with a heavier-gauge metal than what was originally installed.
- Fastener back-out on metal standing seam - The thermal expansion and contraction on Mr-Glass metal roofing in Westchester’s heat is brutal on fasteners. We regularly see screws that have backed out a quarter turn or more on south-facing roof planes. It’s subtle, but it lets wind get under the panel edge. During any Mr-Glass metal roof service, we check fastener torque across the full roof, not just the problem area. A loose fastener today becomes a peeled-back panel in August.
- Flashing failure at pipe penetrations - This is the most over-looked failure point on any Mr-Glass roof system, regardless of material. The rubber boot around plumbing vents and exhaust pipes degrades in direct sun and splits. The fix is straightforward: replace the boot, re-flash the penetration, and re-seal. We carry multiple sizes of quality aftermarket boots so we don’t have to make a second trip. On Mr-Glass tile roofs, we also check the tile cuts around penetrations because that’s where water pools.
Our Mr-Glass Shingle, Tile & Metal Roofing Process
Here’s how a Mr-Glass roofing job works with us, from the first call to the final walkthrough. No mystery, no disappearing act.
- 1
You call (863) 251-5864. A live person answers. We ask about what you’re seeing, where it’s happening, and how long it’s been going on. We schedule a time that works for you, not a four-hour window.
- 2
We inspect the roof thoroughly. Our technician walks the entire roof system, not just the spot you pointed to. On Mr-Glass work, we pay special attention to valleys, penetrations, and seam sealant, the areas where these systems fail first.
- 3
We give you a written line-item estimate. You’ll see the exact scope of work and the cost before you approve anything. We’ll tell you if OEM Mr-Glass parts are necessary or if a quality aftermarket component does the job just as well for less money. You decide, with our honest recommendation.
- 4
We do the work. Background-checked, uniformed technicians complete the repair or replacement. We protect your landscaping and roof access points. No shortcuts on flashing, sealant, or fasteners.
- 5
We test and document. After repairs, we run water on the affected area to confirm the leak is gone. We photograph everything and walk you through what we found and what we did, so you’re not guessing.
- 6
We stand behind it. Every job carries the 36500-Day Done Right Promise. If something isn’t done right, we come back and make it right. No fine print, no arguing.
What Mr-Glass Shingle, Tile & Metal Roofing Costs in Westchester
Here’s what you can expect to pay for common Mr-Glass roofing work in the Westchester area. These are real ranges based on what we’ve billed on similar jobs, not national averages that ignore local labor and material realities.
- Valley flashing replacement (shingle roofs): $380-$750 per valley, depending on length and accessibility
- Pipe boot replacement and re-flashing: $180-$320 per penetration
- Metal panel seam re-seal (per 10 linear feet): $250-$450
- Tile underlayment repair at a leak point: $400-$900 depending on how many tile need to be pulled and reset
- Full Mr-Glass shingle re-roof (1,800 sq ft typical Westchester home): $11,000-$16,500
- Full Mr-Glass metal roof replacement: $22,000-$38,000 depending on panel style and roof complexity
What moves the price most is roof accessibility: a single-story ranch off Bird Road is cheaper to work on than a two-story with a steep pitch near the Palmetto. Call (863) 251-5864 for a free written estimate, and we’ll give you an exact number for your roof. We also offer $40 off any repair over $200 and a free second opinion on any written estimate you’ve received from another company.
Why Westchester Homeowners Call Winslow Windows & Doors for Mr-Glass Work
Ed Winslow founded this company in 2011, and his name has been on the door ever since. That’s not a slogan, it’s a fact. When Westchester homeowners call us about a Mr-Glass roof issue, they’re calling a business with a published address and license number, not a call center routing dispatch to whoever’s available. Our technicians are background-checked and arrive in uniform, so you know exactly who’s walking up your driveway before they knock.
We also understand that a Mr-Glass roof is rarely the only exterior product a homeowner needs serviced. We install PGT, CGI, CWS and ES Windows, which means the same crew that fixes your roof can also handle impact windows or a new front door. That’s not a marketing gimmick, it’s how we’ve operated in Westchester for over a decade. Upfront pricing. No surprises on the invoice. And when we say we answer the phone 24/7, we mean it: a neighbor you can call at 2 a.m. and someone will actually answer.
FAQs
No. As an independent Mr-Glass service provider, we perform repairs that align with standard manufacturer installation and service guidelines. We never use shortcut methods or materials that would compromise your warranty coverage. If a warranty claim is possible, we’ll tell you before we touch anything and help you document the issue properly. Call (863) 251-5864 to talk it through.
We use genuine Mr-Glass components where they matter structurally or for warranty compliance, and quality aftermarket parts where the performance is equal and the price is significantly better. We’ll show you the difference and the cost for each option, and let you decide with our honest recommendation. We won’t upsell you on OEM parts just to pad the invoice.
Most Mr-Glass repairs in Westchester are scheduled within a few days, and we carry the most common replacement parts in our trucks, which means many jobs are completed in a single visit. If you have active water intrusion, call us anytime at (863) 251-5864 and we’ll tell you what can be done to protect your home until we arrive.
That depends on the age of the roof, the extent of the damage, and the overall condition of the underlying structure. We’ll give you a straight answer based on what we find during inspection. If a repair will buy you five more years at a fraction of replacement cost, we’ll say so. If replacing now saves you money over repeated repairs, we’ll tell you that too. Ed’s reputation is built on telling homeowners what they actually need, not what sounds good on a sales sheet.
No. We provide written line-item estimates before any work begins, and we don’t issue change orders unless you approve additional scope in advance. What we quote is what you pay. If we find hidden damage during the job, we stop, show you what we found, and get your approval before proceeding. No surprises on the invoice.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.