Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Roof Replacement & Installation in Westchester: What to Know First
PGT roof replacement and installation in Westchester typically runs $8,900 to $24,000 depending on the roofing system, roof complexity, and whether we’re tying into existing PGT impact-rated skylights or venting assemblies. Most full replacements take 3 to 7 working days once materials land, and we always give a written line-item quote before the first shingle comes off. This page is for Westchester homeowners who already trust PGT for their windows and doors and want that same standard applied to the roof overhead. Call (863) 251-5864 for a free estimate, and you’ll get a real person on the line, day or night.
Key Takeaways:
- We install and replace PGT roofing systems and tie-ins as an independent provider, not a factory branch.
- Every PGT job gets a written quote with line items, no change orders unless you approve them in writing first.
- The 36500-Day Done Right Promise covers our workmanship, and Ed Winslow’s name is on the business.
How PGT Products Fail - and How We Fix Them
PGT makes a serious impact-rated product, but no roof system is immune to South Florida weather. Here’s what we actually see on Westchester roofs week in and week out:
- Impact-rated skylight flashing separation (PGT SkyView and MaxView lines): The factory flashing system is solid, but against repeated thermal cycling on flat barrel-tile sections near Bird Road and Coral Way, the adhesive barrier can delaminate from the decking. Water sneaks under the flashing and travels sideways, showing up as a ceiling stain nowhere near the skylight itself. We strip the area, re-seat the curb with secondary sealant, and re-flash to the deck before reinstalling the unit.
- Seam failure where PGT vent assemblies meet the underlayment: Westchester’s older ranch homes often have low-slope sections that pond water after a hard afternoon storm. The original roofers sealed the PGT vent bases with butyl tape and called it done. But butyl doesn’t hold against standing water for a decade in Miami humidity. We replace the tape with a two-part sealant system and add a secondary water block under the vent collar.
- Fastener corrosion on PGT roof curb mounting brackets: Salt air off Biscayne Bay carries a mile inland, and we regularly pull brackets off Westchester roofs with the zinc coating eaten through in eight or nine years. The factory brackets are fine for most of the country, but not here. We swap them for 316 stainless hardware and isolate dissimilar metals so the next fastener doesn’t turn to powder.
- Ridge vent end-cap blowouts during hurricane-season gusts: The PGT StormSet ridge vent moves good air, but the plastic end caps can crack under wind-driven debris. Once a cap fails, sideways rain gets a straight shot into the attic. We replace caps and add stainless straps at the ends so the next gust doesn’t turn a $40 cap into a $4,000 ceiling job.
- Wrong aftermarket parts on prior repairs: We can’t count how many Westchester homes we’ve seen where someone replaced a PGT part with whatever was on the truck. A generic vent collar that’s a half-inch too small, a skylight lens that doesn’t match the frame’s impact rating. The roof looks fine until the first real storm. We source correct OEM PGT parts or, when lead time is a problem, we tell you exactly what aftermarket part we’re using and why it meets or beats the factory spec before we install it.
Our PGT Roof Replacement & Installation Process
- 1
Call and a real person answers: You phone (863) 251-5864, day or night, and one of us answers. No voicemail loop, no call center. We schedule a time that works for you, and if you’re inside our home county, there’s no trip charge.
- 2
Roof assessment with no sales script: We walk the roof, check the existing PGT tie-ins, look at the underlayment, and photograph everything. If your roof just needs a repair and not a replacement, we’ll tell you that straight. We’ll also put a second set of eyes on any written estimate you already have from another roofer, free.
- 3
Written line-item quote with parts decisions called out: Before anything starts, you get a quote that separates labor, materials, and whichever PGT parts we’re matching. If you’re getting a new PGT skylight or ridge vent, you’ll know the exact model and why we chose it.
- 4
Removal and deck inspection: Old roofing comes off, and we inspect the decking for rot or termite damage. Any bad wood gets replaced and priced at the rate we quoted, not a mystery number added to the final bill.
- 5
Installation to PGT’s installation specs: New underlayment, tied into your PGT roof penetrations per the manufacturer’s published flange and flashing details. We don’t take shortcuts on sealant or fasteners.
- 6
Final walkthrough and documentation: We test the water-shedding on the new roof, photograph the finished work, and walk it with you before we leave. If anything’s not right, the 36500-Day Done Right Promise means we come back and make it right. Period.
What PGT Roof Replacement & Installation Costs in Westchester
Roof work in Westchester runs the same range as the rest of Miami-Dade, but local factors move the number: roof pitch, single-story versus two-story, tile versus shingle versus metal, and the condition of the decking underneath. Here’s what we typically quote:
- Full shingle roof replacement with PGT vent and skylight tie-ins: $8,900-$14,500 on a typical 1,600-2,200 sq ft Westchester ranch.
- Replacement with architectural shingle upgrade and PGT StormSet ridge vent: $11,500-$17,000.
- Tile roof replacement with PGT MaxView skylight re-flash: $19,000-$31,000, depending on tile type and deck work.
- Metal roof installation with PGT tie-ins: $24,000-$38,000 on the same footprint.
- PGT skylight replacement or re-flash during roof work: $1,200-$2,800 per unit, parts and labor.
What moves the price most is decking condition. About a third of the Westchester homes we open up need decking spots replaced, and we charge that at the same square-foot rate we put in the quote. You’ll know before we start. Call (863) 251-5864 for an exact quote, free.
Why Westchester Homeowners Call Winslow Windows & Doors for PGT Work
Ed Winslow has been serving Westchester for over 15 years, and his name is on the business, which means the job doesn’t end when we pull out of your driveway. We’re an authorized installer for PGT along with CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru, so when a roof job touches a window or door, we’re not calling another company to figure it out. Every technician who steps on your Westchester roof is background-checked and in uniform, and every call to (863) 251-5864 is answered by a live person, 24/7. We publish our address and license number because you should know exactly who’s on your property. And the 36500-Day Done Right Promise is the real deal, if it’s not done right, we make it right, no fine print and no expiration date.
FAQs
As an independent PGT service provider, we follow PGT’s published installation details so the manufacturer’s warranty on the PGT product itself stays valid, but our workmanship is backed by our own 36500-Day Done Right Promise. The PGT warranty covers the product; it doesn’t cover roof installation errors. We make sure our installation doesn’t become the reason a claim gets denied. Call (863) 251-5864 if you want us to check whether your current roof meets PGT’s specs.
Yes, in most cases we can re-flash or re-seat a PGT skylight without tearing off the whole roof. The fix costs between $1,200 and $2,800 per unit depending on what’s failed. We’ll tell you honestly if the surrounding roof is too far gone to save, and we won’t try to oversell you a full replacement just because the leak happened. Call (863) 251-5864 and we’ll come out and take a look.
A full shingle roof replacement with PGT tie-ins usually takes 3 to 5 working days once materials are on site. Tile and metal roofs run 5 to 7 working days on average. Weather can move the schedule, but you’ll get a real timeline in your written quote, not a vague “we’ll be done soon.” Call (863) 251-5864 for a specific timeline for your roof.
We use OEM PGT parts whenever they’re available, and when lead times stretch too long, we’ll only use an aftermarket part that meets or beats the factory spec, and we’ll tell you exactly what we’re doing and why before we install it. You’ll never get a mystery part on your roof. Call (863) 251-5864 to discuss your PGT roof needs.
No. The only thing that changes the price is decking replacement or hidden damage we couldn’t see until the old roof came off, and that work is priced at the exact rate in your original written quote. You approve anything extra in writing before we proceed. No surprises on the invoice. Call (863) 251-5864 to schedule your free estimate.
Get Your PGT Roof Done Right in Westchester
My name’s on the business. That means the job doesn’t end when we pull out of your driveway. Call (863) 251-5864 today for a free estimate on PGT roof replacement and installation in Westchester, and you’ll talk to a real person who knows PGT and knows your neighborhood. We’re the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.