French & Double Doors

French & Double Doors in Westchester, FL | Winslow Windows & Doors

French and double doors bring something no sliding panel can match: a wide, symmetrical opening that connects a living room to a patio, a dining room to a garden, or a master suite to a morning balcony. In Westchester, Florida, that opening also has to stand up to hurricane season. Winslow Windows & Doors installs paired impact-rated French doors built with laminated glass in every lite and multi-point locking hardware, engineered to Florida Building Code High-Velocity Hurricane Zone requirements. We handle the measuring, permitting, and installation so the system performs exactly as it was tested. Call (863) 251-5864 to schedule a free on-site measurement.

Call (863) 251-5864

Product Overview - French & Double Doors

These are paired, impact-rated French doors with symmetrical sightlines, meaning each panel mirrors the other so the opening looks balanced from inside and out. The design works well on Mediterranean, coastal contemporary, and ranch-style homes throughout Westchester, where homeowners want a full-width opening without sacrificing storm protection. Every lite carries laminated impact glass, so there is no weak point where a single pane would fail first.

The frames are available in aluminum and vinyl. Aluminum suits larger openings and carries a slimmer profile for cleaner lines. Vinyl offers strong thermal performance and lower upkeep over time. Both materials are factory-built to accept the laminated glass and multi-point locking hardware that gives these doors their structural integrity. The hardware engages at the head, sill, and meeting stile, tying both panels together under wind load instead of relying on a single latch point.

These are not decorative doors with impact glass tossed in. They are engineered assemblies, tested as a unit, and installed to the same standard. That distinction matters in Westchester, where wind-driven rain and debris are realistic concerns, not hypothetical ones.

Technical Specifications

• Frame materials: Aluminum, Vinyl
• Maximum width: Up to 96 inches
• Glass options: Laminated Impact Glass (PVB Interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass
• Finish options: White, Almond, Bronze, Black, Tan
• Hardware: Multi-point locking across head, sill, and meeting stile
• Design pressure: Matched to your wind zone, up to +/-100, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration

Every configuration gets its own approval paperwork. When you receive a quote from Winslow Windows & Doors, the specific NOA or Florida Product Approval number for your size, frame material, and glass package is listed on it. We do not use a generic sheet for the whole product line.

Hurricane & Compliance Performance

Laminated Impact Glass
Each lite uses a PVB (polyvinyl butyral) interlayer sandwiched between glass panes. Under impact, the glass may fracture, but the interlayer holds the broken pieces in the frame, keeping the building envelope sealed and preventing wind and rain from entering the home.

Miami-Dade NOA / Florida Product Approval
Compliance is verified per configuration, not per product family. Winslow Windows & Doors provides the applicable Miami-Dade Notice of Acceptance or Florida Product Approval number on your specific quote, so the paperwork matches the door you are actually buying for your Westchester home.

FBC / HVHZ Compliance
The door systems are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That is the standard applied in Miami-Dade and Broward counties, and it governs how the product is tested, labeled, and installed here in Westchester and surrounding areas.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are evaluated under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These tests simulate what happens when debris hits a door and wind pressures cycle over hours.

Design Pressure Matched to Your Wind Zone
The design pressure rating is matched to the wind zone of the specific opening, up to +/-100 PSF, never higher. We do not over-spec a door to inflate a number. A properly matched design pressure means the door performs where it is installed, without paying for capacity that is irrelevant to the location.

Energy Performance
Low-E and insulated glass options are available for homeowners who want impact protection plus thermal performance. Low-E coatings reduce heat gain through the glass, which matters in Westchester where afternoon sun hits west-facing doors hard for much of the year.

Color & Glass Options

Finish selection is where the door starts to fit the house rather than just fitting the opening. White and almond are the workhorse choices for Westchester homes with stucco or light-colored exteriors, giving the doors a clean, traditional look. Bronze and black read more contemporary, and they hold up visually against darker trim, wrought-iron accents, and coastal industrial styles. Tan splits the difference, blending with earth-toned exteriors and helping a large door disappear into the facade.

On the glass side, clear laminated impact glass is the standard starting point, giving you true, unaltered light transmission. Tinted glass cuts glare and heat without the full reflectivity of a coated product. Low-E insulated glass adds a coating and an insulating air space, improving energy performance for doors that face direct sun. The best choice depends on orientation: a west-facing French door in Westchester benefits from Low-E more than a north-facing one, and we will talk through that during your consultation.

Installation by Winslow Windows & Doors in Westchester

An impact-rated French door is only as good as its installation. The NOA rating applies to the door as tested in a laboratory. If we set the frame out of square, skip the perimeter seal, or anchor it incorrectly, the system will not perform in a storm the way the paperwork says it will. That is why Winslow Windows & Doors takes installation seriously enough to follow a defined process on every opening.

We start with a pre-install inspection of the rough opening, checking dimensions, substrate condition, and any signs of water intrusion from the old door. Then we set the frame level, plumb, and square, shimming and anchoring it so that both panels hang true and the multi-point hardware engages without resistance. Around the perimeter, we use AAMA 812 low-expansion foam sealant, which seals without distorting the frame, installed per AAMA 2400/2410 practice. After the door is hung and adjusted, we run a final water test and walk you through operation, locking, and basic care. We also stay aware of permitting requirements in Westchester, including HVHZ submittal needs, so the approval paperwork for your specific door matches what the building department wants to see.

Westchester sits close enough to the coast that wind-driven rain is a real part of every storm season. Laminated glass helps, but a poorly sealed perimeter will still leak. That is the difference between a door that was installed and one that was installed properly.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Westchester

If you are replacing a sliding door, widening a wall opening, or building new in Westchester, these French and double doors deserve a proper look. Winslow Windows & Doors will measure your opening, spec the right design pressure, and quote the door with the exact paperwork your permit requires. Call (863) 251-5864 to schedule your free on-site measurement.

Written by the team at Winslow Windows & Doors, serving Westchester, FL and surrounding communities with hurricane-impact windows and doors.