Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterGeometric & Shaped Windows in Westchester, FL | Winslow Windows & Doors
Geometric and shaped windows give a Westchester home real architectural character. A half-round transom over an entry door, a hexagonal window flanking a cathedral ceiling, an eyebrow arch on a front elevation, these profiles turn a standard facade into something you notice from the street. Winslow Windows & Doors supplies and installs custom triangular, hexagonal, octagonal, arched, and curved impact-glass configurations through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. If you’re planning a new build or replacing an existing shaped window in Westchester, call (863) 251-5864 to start the conversation.
Product Overview - Geometric & Shaped Windows
Shaped windows are not an afterthought in Florida construction. They’re specified early by architects and builders because they anchor sightlines: the circle window above a stair landing, the octagon that centers a guest bath, the trapezoid that follows a roofline. What makes the impact-rated versions different is the engineering behind the profile. Each unit is custom-fabricated to your opening’s exact dimensions and angle set, then glazed with laminated impact glass so the same decorative statement also meets High-Velocity Hurricane Zone code expectations. You’re not choosing between architectural detail and wind-zone protection.
The frame itself matters as much as the glass. We spec aluminum or vinyl depending on the application. Aluminum carries a slimmer sightline, which matters on a radius arch or a tight-angled pentagon where the frame shouldn’t compete with the glass. Vinyl offers a softer profile and works beautifully on Mediterranean-style elevations common throughout Westchester. Either material is finished to match or complement your existing door and window suite, and both are built around the same laminated glass core that keeps debris out and keeps the glazing intact under impact.
At Winslow Windows & Doors, we’ve installed shaped units in single-family homes, hacienda renovations, and custom new construction across Westchester. The openings vary wildly: one client’s octagon is 18 inches across; another’s arched transom spans nine feet. The common thread is that neither came out of a stock bin. Each was measured on site, templated, fabricated, and set level, plumb, and square by our crew, not by a sub we hand the box to.
Technical Specifications
| Specification | Details |
|---|---|
| Frame materials | Aluminum (narrow sightlines, suited to arched and radius profiles); Vinyl (thermal-friendly, available in warm tones for coastal / Mediterranean exteriors) |
| Maximum size | Custom-fabricated to order; no stock size limitations within engineering limits for your wind zone |
| Glass options | Laminated Impact Glass (PVB interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass |
| Finishes | White, Almond, Bronze, Black, Tan |
| Design pressure | Matched to your wind zone, up to +/-100; never higher than the tested configuration requires |
| Compliance | Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to FBC HVHZ requirements |
Lead time varies by profile and glass pack. Larger radius arches and custom-pane laminations take longer than a simple octagon. We confirm the fabrication window when we quote your opening, and we set the installation date against the permit schedule for Westchester.
Hurricane & Compliance Performance
Laminated Impact Glass
Every impact-rated geometric unit we sell carries laminated glass with a PVB (polyvinyl butyral) interlayer. If a windborne object strikes the pane, the interlayer holds the broken glass in the frame instead of letting it enter the home. This is the core mechanism that allows a shaped window to maintain its protective function even after impact.
Miami-Dade NOA / Florida Product Approval
Specific configurations carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers. Because shaped windows are custom-fabricated, the applicable approval number is issued per configuration. We verify the exact listing on your quote so your permit package is clean.
FBC / HVHZ Compliance
Every geometric window we install is engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. That’s the governing standard for Westchester and Miami-Dade County, and it dictates glazing, anchoring, and frame construction. This is not a “hurricane-rated” label in marketing copy; it’s a code path the unit has to satisfy.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under protocols TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). A shaped unit carries the same testing family as our rectangular impact windows. The geometry changes; the test protocol doesn’t.
Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. In practical terms: we don’t sell a PSF rating you don’t need, and we don’t stamp a number that isn’t backed by the tested configuration. Your quote includes the DP rating for your specific opening and location.
Energy Performance
Where energy performance matters, Low-E insulated glass is available within the impact-rated package. The Low-E coating reduces solar heat gain, which matters on west-facing shaped units. Tinted glass is another route when you want glare control without changing the architectural look.
Color & Glass Options
Finish selection for a shaped window in Westchester usually follows the home’s broader door and window scheme. White and Almond dominate on stucco exteriors, ranch-style homes, and coastal cottages; they read clean and bright against a light facade. Bronze and Black are our most requested finishes on modern elevations and on homes with black-framed impact doors or dark roof profiles. Tan splits the difference, a warmer neutral that sits well on terracotta or beige stucco common to South Florida.
On the glass side, laminated impact is the baseline for any opening requiring HVHZ compliance. Clear laminated keeps the view unobstructed, which matters on a large eyebrow arch or a picture-style octagon facing the yard. Low-E insulated glass layers thermal performance into the same impact package, ideal for bedrooms or sun-facing gables in Westchester. Tinted glass cuts glare and heat before it reaches the interior, and we’ve used it on high second-story triangular units that catch direct afternoon sun. Each glass type is available within the impact-rated construction, so you’re never trading protection for performance.
Installation by Winslow Windows & Doors in Westchester
A geometric impact window is only as good as its installation. The NOA and Florida Product Approval listings assume correct anchoring, shimming, and perimeter sealing. If the frame is racked, the glass is stressed, and a stressed lite is a compromised lite. That’s why we install every unit ourselves, with the same crew you meet at the quote.
Our process starts with a pre-install inspection of the rough opening. We verify the structural condition of the buck, confirm opening dimensions against the fabrication ticket, and check that the wall or fascia can receive the anchoring specified for the unit’s design pressure. Then we set the frame level, plumb, and square. On a six-sided opening, that means three planes checked independently, because an octagon that’s an eighth-inch out of square fights the glass at every corner.
Perimeter sealing follows AAMA 812 practice with low-expansion foam, which fills irregular gaps without bowing the frame. We pull the flashing and integration details per AAMA 2400/2410 standard installation practice, tie the new opening into the existing weather barrier, and run a final water test before interior trim goes back on. Cleanup is part of the job, not an add-on.
Westchester adds specific considerations. Many homes sit in HVHZ wind zones where permit reviewers scrutinize impact-product submittals on shaped openings specifically, because non-rectangular units get less code-review attention. We’ve walked enough Westchester permit packages to know what reviewers want to see: the per-configuration NOA or FL Product Approval number, the DP rating matched to the elevation, and anchoring detail. We prepare that documentation as part of your quote, not after the permit gets kicked back. Improper installation compromises the NOA-rated system. It’s the reason we never hand a shaped unit to a general framing crew and walk away.
Frequently Asked Questions - Geometric & Shaped Windows
Design pressure is matched to your specific wind zone, up to +/-100, never higher. Your quote from Winslow Windows & Doors includes the DP rating for your exact opening and elevation, and we submit that documentation with your Westchester permit package. Call (863) 251-5864 with your address and window location for a specific DP figure.
Lead time depends on the profile and glass pack. A standard octagon in clear laminated runs faster than a radius arch with Low-E insulated glass. We confirm the fabrication window when we quote your opening, and we schedule installation against your Westchester permit timeline so the unit doesn’t sit in our warehouse while the city processes paperwork.
Yes, and we handle it. Each shaped configuration carries a Miami-Dade NOA or Florida Product Approval number issued per configuration. We pull the correct listing for your exact unit and include it in your permit submittal. If you’re replacing an existing window in Westchester, call (863) 251-5864 and we’ll verify what your jurisdiction requires before you order.
Yes. Every geometric window we sell is custom-fabricated to your opening. Triangles, hexagons, octagons, trapezoids, radius arches, eyebrow arches, and custom-angled combinations are all built to order. We template the opening on site, confirm the angles, and the unit is fabricated to those dimensions, not the other way around.
Wash the frame and glass with mild soap and water, and keep the weep holes clear so water drains the way the profile was designed to. Inspect the perimeter sealant once a year. On Westchester homes near salt air, a rinse every few months prevents buildup on bronze and black finishes. If you notice any stress cracks or seal separation, call us at (863) 251-5864 before the next storm season.
Get a Quote - Geometric & Shaped Windows in Westchester
The best time to spec a shaped window is before the rough opening is framed, but we quote replacements any time. Winslow Windows & Doors handles fabrication, submittal paperwork, and installation across Westchester. Call (863) 251-5864 to schedule a free on-site measurement and get a written line-item quote for your project.
Written by the team at Winslow Windows & Doors, serving Westchester, FL with hurricane-impact windows and doors.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
