Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Sunset
Door installation in Sunset runs about $1,200 to $4,800 for a typical entry door, depending on whether you’re going with a standard Therma-Tru fiberglass unit or a Miami-Dade NOA-rated impact door. Most Sunset jobs are finished in a single day once the door arrives on site. If you’ve got a 1950s CBS rancher off SW 72nd Street with an original jalousie opening, that number shifts and the job takes more planning, which we’ll walk through below. Call (863) 251-5864 for a free in-home measure and a written quote with no obligation.
We know Sunset because we work Sunset lots every week: tight side yards, party walls, pre-dawn work-hour limits, and inspectors who check every door against Miami-Dade’s High-Velocity Hurricane Zone code. That’s not a problem for us. It’s the job. Door Installation here means something different than it does a county north, and we plan every Sunset project around that reality.
Why Winslow Windows & Doors Is Sunset’s Preferred Door Installation Company
Ed Winslow started this company in 2011, and his name has been on every truck, every invoice, and every warranty we’ve issued since. We’re the locally owned alternative to the national chains that send a rotating cast of subcontractors to your door. When you call us, a live person answers. Not a voicemail. Not a call center. Someone who knows what an NOA is and why it matters on your block. At 2 a.m. on a Sunday, you still get a human voice.
Sunset homeowners call us for a few reasons that repeat. We carry a published address and license number, so you know exactly who you’re dealing with. Every technician who pulls up to your house is background-checked and in uniform, and you’ll know their name before the truck parks. And the 36500-Day Done Right Promise means what it says: if it’s not done right, Ed makes it right. That’s a hundred-year standard of accountability, and it’s why our Sunset customers stay with us for their windows, their next door, and their roof.
We also stock parts for the brands we service, so a courtesy follow-up or warranty visit to a Sunset home doesn’t mean waiting on a shipment from a regional warehouse. The one down the road is us.
Our Door Installation Services in Sunset
Entry Doors
A new entry door on a Sunset home has to do three jobs at once: open and close 20 times a day, seal against hundred-degree humidity, and meet Miami-Dade impact code when the inspector walks up. We install fiberglass and steel entry systems from Therma-Tru and other manufacturers, and we order every Sunset door to its actual rough opening, not a nominal one. On a 1954 CBS rancher near Southwest 72nd Street, that distinction is the difference between a clean one-day install and a reorder that drags out six weeks.
Hurricane-Proof Front & Entry Doors
This is the service Sunset calls us about most. Every replacement door in unincorporated Miami-Dade must carry a Miami-Dade Notice of Acceptance, and that requirement is not negotiable. We install impact-rated entry doors with design pressures matched to your specific opening, your floor height, and the exposure of your lot. A door six feet from the street on an east-facing Sunset lot endures different wind pressure than one tucked behind a garage. We order accordingly. We also handle the permit paperwork and pull the permit in our name, so you’re not chasing the county.
French & Double Doors
French doors off a Sunset living room or dining area look great and leak air if they’re ordered wrong. We see it constantly: someone buys a standard double-door unit, and the rough opening is an inch and a half too short because the house was framed in 1962 for a jalousie panel. We measure each opening, check for slab settlement that’s shifted the header, and match the door to what’s actually there. If the door faces a screened patio, you still need impact rating, because Miami-Dade treats any opening in the building envelope the same way. We’ll explain the logic and quote the right unit the first time.
Replacement Doors
Replacing a door on a Sunset home usually means more than swapping a slab. The original jambs are often rotted at the threshold from years of humidity and driving rain. The rough opening is rarely square. And the old unit was rarely rated for anything. We remove the old assembly, inspect what’s behind it, repair or reframe as needed, and set the new door with fasteners that meet HVHZ anchoring requirements. Then we shim, level, seal, and test the swing until it closes like a bank vault. Door Installation in Sunset is our home turf, and we treat every replacement as if the inspector’s truck is already on the way.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunset
We’re authorized installers for Therma-Tru, ECO Window Systems, and Mr-Glass, among others, and we service every door we install. Because we stock fasteners, sweeps, and common replacement components locally, a threshold adjustment on a Sunset home doesn’t mean waiting on a parts drop from Atlanta. If you’ve got a Therma-Tru fiberglass door that’s sagging, an ECO Window Systems impact door that needs a sweep, or a Mr-Glass unit with a seal question, call us. We’d rather fix a door than replace one, and we’ll tell you which makes sense for the money.
Common Door Installation Problems We See in Sunset Homes
- Jalousie-era rough openings that match nothing modern. Sunset is dense with post-WWII CBS homes built from the late 1940s through the 1970s, and a huge share still have original louvered aluminum doors. The rough openings were sized for jalousie units, not contemporary impact frames. We custom-fabricate or add blocking to make the new door fit dead square, which beats the alternative: a reorder that adds weeks to the job.
- Out-of-county bidders with the wrong approval. A Florida Product Approval is fine in Broward. In unincorporated Miami-Dade, an inspector will reject it on sight if it lacks a Miami-Dade NOA. We’ve seen Sunset homeowners lose weeks and deposits to contractors who didn’t know the difference. We know it because we work it every single week.
- Rotted jambs hiding behind old screen doors. Humidity in Sunset is relentless. Original wood jambs wick moisture from the slab and rot at the base even when the door face looks fine. We pull the old assembly and check before ordering anything, so you don’t pay for a new door that gets hung on a failing frame.
- Tight-lot staging that angers the neighbor. A Sunset lot often has six feet or less between houses. We stage inside your garage or driveway, never across the neighbor’s driveway, and we hand-deliver a party-wall notice before we start cutting or hammering. That keeps the code inspector and the neighbor both off your back.
What Door Installation Costs in Sunset
A standard non-impact entry door in Sunset typically runs $1,200 to $2,800 installed, depending on material and whether the jamb needs rebuilding. An impact-rated front or entry door with a Miami-Dade NOA runs $2,500 to $4,800 on a standard sized opening, and larger or custom widths push toward $6,000 and up. French and double doors in Sunset usually land between $3,500 and $7,500 installed, with the wide range driven by opening width, whether you’re doing a single or double unit, and the amount of reframing the 60-year-old wall needs. Full replacement projects, like swapping every exterior door on a Sunset home, often run $8,000 to $18,000 or more when impact ratings and custom fabrication get involved.
What moves the price in Sunset specifically: opening count and size, whether the rough opening is standard or jalousie-era, how close your house sits to the side lot line, and whether the inspector requires design pressures above the baseline for your elevation and exposure. Frame material matters too: fiberglass costs more than steel but lasts longer in Sunset’s humidity. We give every homeowner a written, line-item quote before any work starts, built from a free in-home measure. That number does not change unless you change the scope. Call (863) 251-5864 to schedule yours.
Pricing for Door Installation in Sunset, FL
You’ll see a lot of numbers online and most of them won’t apply to a 1958 CBS house on a 50-foot Sunset lot. Here’s what we actually see in this market. A basic replacement entry door without impact rating runs $1,200 to $2,200. An impact-rated front door with a Miami-Dade NOA runs $2,500 to $4,800, and if your opening is a non-standard jalousie width, add $300 to $800 for custom fabrication or blocking. French doors run $3,500 to $7,500, and full replacement packages across a whole house run $8,000 to $18,000 or beyond. The free in-home measure tells you exactly where you land. Call (863) 251-5864 and we’ll bring the tape measure and the NOA book.
Florida Pays You Back
Sunset homeowners can stack real financial help on a door replacement. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. A wind-mitigation inspection, which runs about $75 to $150, can earn you windstorm-premium credits that average roughly 25% off the windstorm portion of your policy. Florida’s sales-tax exemption applies to impact-resistant windows and doors, so the hardware itself comes without state sales tax. And the federal 25C energy credit offers 30% of the product cost on qualifying units, up to $600 per year. We’ll point you to the right paperwork and let your insurer or tax preparer confirm what you qualify for. Nobody at Winslow promises a credit we can’t guarantee.
We Also Serve Cities Near Sunset
We work across the South Dade corridor: Westchester, Miami, Coral Gables, and South Miami. If you live a few blocks outside Sunset proper, call anyway. We’re likely already working your block. The same Miami-Dade NOA rules apply to every city in the county, and we carry the product approvals to match. The one down the road is us.
Serving Sunset, FL - Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Sunset
Yes. Miami-Dade treats any opening in the building envelope the same way, whether it faces a screened patio, a backyard, or the street. If the French door is part of the conditioned space, it must carry a Miami-Dade NOA and meet HVHZ anchoring requirements. We order the impact-rated glass and reinforced frame, and we’ll show you the NOA number for your exact configuration before we install. Call (863) 251-5864 if you’re not sure what your current door has.
It changes staging and access, not the door itself. On a tight lot with six feet or less to the property line, we stage materials inside your garage, run leads through your panel, and hand-deliver a party-wall notice to the adjacent homeowner. If the side yard is too narrow for a standard lift, we dry-fit the door in place before final anchoring. Expect a small line item for tight-access staging on some Sunset jobs, and we’ll show it on your written quote. Call (863) 251-5864 and we’ll measure both the door and the access path before you commit to anything.
Yes. Unincorporated Miami-Dade restricts construction noise before 7:00 a.m. and after a set evening cutoff. We schedule cutting, hammering, and anchoring for allowed daytime hours, and on tight Sunset lots we’ll tell you ahead of time what time the noise starts and stops. We do quiet prep work first, then bring the saw out when it’s legal. If you have a sleeping baby or a neighbor who works nights, call (863) 251-5864 and we’ll plan the loudest phase for a specific window.
They do, and they fail doors without it on the spot. A Florida Product Approval that works in Broward will not pass inspection in unincorporated Miami-Dade. The inspector checks the door against the NOA number listed on your permit application. If we pulled the permit, which we do on every Sunset replacement, the approval is matched before the door ever arrives. Call (863) 251-5864 and we’ll show you the exact NOA for the door we recommend, before you sign anything.
Usually yes, but don’t expect a quick drop-in. Jalousie-era rough openings are often narrower and shorter than modern standards, and the concrete sub-sill may have settled. We take exact measurements, compare them to the manufacturer’s published frame dimensions, and either order a custom-width unit or add blocking to bring the opening to spec. That’s a small cost on the front end, and it’s the difference between a door that seals and a door that leaks. Call (863) 251-5864 for a free measure and we’ll tell you what your specific opening needs.
How We Handle a Tight Sunset Lot
Most Sunset homes sit on 50-by-100-foot lots with six feet or less to the side property line. That shapes every door job we do here. We stage materials inside your garage or on your driveway only, never across the neighbor’s driveway or on their grass. If the side yard is too narrow for a helper and a door at the same time, we carry the unit through the house or lean it against the garage while we prep, then bring it around when the opening is ready. We hand the adjacent homeowner a written party-wall notice before we start cutting, so they know what’s happening and when. And we do the loud work inside the county’s allowed hours.
On a 1954 CBS rancher off SW 72nd Street, our crew pulled a rotted, non-rated jalousie door with a rusted jamb, only to find the rough opening was 2 inches narrower than any stock Therma-Tru impact frame. Because the house sits 6 feet from the side lot line, we staged the new door, fasteners, and the Hilti gun inside the garage, gave the adjacent homeowner a written party-wall notice, and dry-fit a custom-width fiberglass door before final anchor. The job passed HVHZ inspection the first visit. That’s the kind of thing a chain installer discovers on install day and leaves you without a front door for a week. We plan for it before we order anything.
All this affects your quote. Tight access means more labor hours, but planning for it upfront is cheaper than a crew standing around on install day. We don’t bill you for our planning. We build it into the upfront, line-item quote so nobody is surprised later.
Get Your Free Sunset Door Installation Estimate
If you’re in Sunset and your door is sagging, leaking air, or fails the Miami-Dade NOA test, call (863) 251-5864. We’ll come out, measure the actual opening, check the access path, and hand you a written, line-item quote on the spot. Free, no obligation, and no trip charge inside our home county. Winslow Windows & Doors is the one down the road, and Ed Winslow’s name is on every job we do.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Sunset and the surrounding South Dade communities since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.