Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterEntry Doors in Westchester, FL
A new door installation in Westchester, FL typically runs between $800 and $3,200 installed, depending on the door material, impact rating, and frame work needed. Most jobs are completed in a single day, and if your existing frame is in good shape, you could be walking through a new door by afternoon. At Winslow Windows & Doors, we’ve been doing exactly that for Westchester homeowners since 2011 – Ed Winslow’s name is on every job, and that means the work is done right the first time or we come back and make it right.
Your front door does more work than most people give it credit for. It’s the first thing a guest sees, the last line of defense against South Florida humidity and hurricane-season wind loads, and a significant factor in how well your home holds its conditioned air. In Westchester’s climate – where afternoon storms roll in fast off the bay and saltwater air steadily eats away at hardware and weatherstripping – a door that’s past its useful life isn’t just an eyesore. It’s a real liability.
We specialize in Door Installation in Westchester across the full range – fiberglass, steel, wood-composite, and impact-rated units – and entry doors are one of the most common calls we get. If you’d like a free, no-obligation estimate, call us at (863) 251-5864. A real person will pick up, any time of day or night, no voicemail.
When You Need a New Entry Door
Some of these signs are obvious. Others sneak up on you over a few seasons until you’re running the AC harder and harder to compensate for a door that stopped sealing years ago. Here’s what Westchester homeowners typically tell us when they call:
- Drafts around the frame, even when the door is latched. In Westchester’s humid summers, a compromised weatherstripping seal doesn’t just raise your FPL bill – it pulls moisture into the wall cavity, which eventually becomes a mold problem. We see this regularly in homes built in the 1980s and early 1990s where the original door was never upgraded.
- Visible daylight at the top or sides of the door. If you can see light when the door is closed, your frame has shifted or the door has warped. This is especially common in Westchester after a wet rainy season puts repeated stress on wood-core frames.
- Difficulty latching or locking the door. A door that sticks, drags, or requires a body-check to close has settled out of square. Beyond the inconvenience, a door that doesn’t latch cleanly is a security problem and can fail code in certain situations.
- Your door is not impact-rated. Miami-Dade County requires impact-rated or protected openings for new construction and many permit-triggered replacements. If your entry door is a standard-duty unit installed before the modern wind codes, a replacement gives you the opportunity to come into full compliance.
- Surface damage that’s beyond cosmetic repair. Cracked fiberglass, deep rust on a steel skin, or delaminating wood veneer won’t get better with paint. Once the skin is breached, moisture gets in and the deterioration accelerates. We see this a lot in Westchester homes within a few blocks of the canal and bay areas where salt air is a constant factor.
- Upgrading before a home sale. Entry doors are one of the highest-return exterior upgrades for resale. A Therma-Tru fiberglass door installed before listing photographs can make a measurable difference in buyer perception and appraisal value – and it’s a selling point your real estate agent can put in writing.
Our Entry Door Installation Process
We don’t show up with a door in the truck and start prying things apart. A proper replacement door installation in Westchester involves a specific sequence, especially when the job touches an exterior opening that needs to perform in hurricane conditions. Here’s how we handle it, from first call to final walkthrough:
- Measure and assess the existing opening. Before anything is ordered, Ed or one of our background-checked technicians comes out to measure the rough opening, check the frame condition, examine the threshold, and look at how the current door was flashed and sealed to the exterior wall. In older Westchester homes, this step sometimes reveals a framing issue that would affect the new installation – better to know before the door is on order than after it arrives.
- Product selection and upfront pricing. Based on your opening size, your home’s wind exposure category, and what you want the door to do – security, energy performance, curb appeal, or all three – we’ll walk you through the options. We’re authorized installers for Therma-Tru, one of the most respected names in fiberglass entry doors, and ES Windows for impact-rated units that meet current Miami-Dade and Florida Building Code requirements. You get a written, itemized quote before anything is scheduled. No surprises on the invoice.
- Permit coordination, where required. Entry door replacements in Miami-Dade County often require a permit, particularly when the new door differs in impact rating or size from the existing one. We handle the permit application, coordinate the inspection schedule, and make sure your paperwork is clean. Skipping this step can create real problems at resale – we’ve heard from homeowners who bought a house where a previous owner put in an unpermitted door replacement and had to pull it out to satisfy the buyer’s lender.
- Removal and frame preparation. On installation day, we remove the old door unit carefully, inspect the rough frame and sill for rot or damage, and make any necessary repairs before the new frame goes in. This is the step a lot of lower-cost installers skip or rush. Putting a new door into a compromised frame just moves the problem forward a few years.
- Installation, flashing, and sealing. The new door is set, shimmed level and plumb, anchored according to manufacturer and code specs, and flashed and sealed at all penetrations. For impact-rated units, the fastener pattern and anchor depth matter for your Notice of Acceptance (NOA) to remain valid – we follow it precisely because that document is what your insurance carrier and the inspector both want to see.
- Final inspection and walkthrough. We test the operation, check the weatherstripping seal, adjust the strike plate, and hand you the hardware keys. You get to see exactly what was done and ask any questions before we pack up. Then we clean up the site. The job isn’t closed until you’re satisfied – that’s what the 36500-Day Done Right Promise means in practice.
Entry Doors Pricing in Westchester, FL
Entry door costs in Westchester vary more than most homeowners expect, and the gap between a $900 job and a $3,000 job is real and explainable. Below is an honest breakdown of what drives the number:
| Door Type / Scenario | Typical Installed Range |
|---|---|
| Standard steel entry door, existing frame in good shape | $800 – $1,200 |
| Fiberglass entry door (e.g., Therma-Tru), standard installation | $1,100 – $1,800 |
| Impact-rated fiberglass or steel entry door, Miami-Dade compliant | $1,500 – $2,600 |
| Impact-rated entry door with sidelites or transom | $2,200 – $3,500+ |
| Frame repair or replacement added to installation | $200 – $600 additional |
| Permit fees (Miami-Dade, where required) | $75 – $200 depending on scope |
A few things that move the number up: non-standard opening sizes, extensive frame rot, masonry walls that require specialized anchoring, French & Double Doors with decorative glass inserts and laminated impact glazing, and multi-point locking hardware on high-security units. Things that keep costs down: a clean rough opening, a standard 3/0 x 6/8 size, and straightforward drywall returns on the interior.
Seniors and veterans receive a permanent 10% discount on all Winslow work – no expiration, no fine print. And if you’ve already received a written estimate from another contractor, we’ll give you a free second opinion at no charge. Call (863) 251-5864 for an exact quote. Estimates are free, and someone will actually answer when you call.
What About the 36500-Day Done Right Promise?
It’s simple: if the installation isn’t right, we come back and make it right. No arguing about warranty terms, no “that’s not covered” conversations. Ed Winslow has been doing business in this community since 2011 with a published address and license number – there’s no disappearing act possible. That’s the kind of accountability a national chain with a 1-800 number structurally cannot offer you.
Why Westchester Homeowners Choose Winslow
There are a lot of door companies operating in Miami-Dade. What we hear consistently from Westchester customers is that they chose us because they could reach a real person on the first call – not a voicemail, not a callback within 24 hours, a live conversation. That matters at 8 p.m. when a storm just pushed water under your entry door and you’re trying to figure out what to do.
Ed Winslow started this company in 2011 and it’s stayed locally owned and operator-led since day one. Our technicians are background-checked and show up in uniform – you know who’s walking through your front door before the truck is in the driveway. We work with premium brands like Therma-Tru and ES Windows because those are the products that hold up in South Florida’s conditions and have the certifications Miami-Dade County inspectors actually want to see. We’re not going to upsell you on a door you don’t need, and we’re not going to talk you into the cheapest option just to close the job fast.
Westchester sits in a coastal exposure zone where the combination of humidity, salt air, and wind load makes door selection and installation quality matter more than in most other parts of the state. We know this neighborhood. We work here regularly, and the conditions here – the canal-adjacent properties that see more salt-air exposure, the older CBS homes where the frame work is non-standard, the HOA communities with specific exterior finish requirements – aren’t abstract to us. They’re Tuesday.
Key Takeaways
- Entry door installation in Westchester runs roughly $800 to $3,200+ installed, depending on material, impact rating, and frame condition.
- Miami-Dade County often requires permits for entry door replacements – especially impact-rated units. We handle the permit process.
- Therma-Tru and ES Windows are two of the brands we install regularly and recommend for Westchester’s coastal climate conditions.
- Every job is backed by the 36500-Day Done Right Promise – if it’s not right, we come back.
- Seniors and veterans receive a permanent 10% discount. Free second opinions on written estimates, always.
- Someone answers the phone at (863) 251-5864 around the clock – not a recording, a person.
FAQs – Entry Doors in Westchester, FL
How much does an entry door installation cost in Westchester?
Entry door installation in Westchester typically costs between $800 and $3,200 installed, with most standard jobs landing in the $1,100 to $1,800 range for a quality fiberglass door on an existing frame in good condition. Impact-rated units, sidelites, or frame work push the number higher. The best way to get an accurate figure is a free on-site estimate – call (863) 251-5864 and we’ll set one up at no charge.
Do I need a permit to replace an entry door in Westchester / Miami-Dade County?
In most cases, yes – Miami-Dade County requires a permit when you’re replacing an entry door with a different impact rating, a different size, or when the work involves structural frame repair. We pull the permit as part of the job, coordinate with the inspector, and make sure your paperwork is clean for future resale or insurance purposes. Skipping the permit saves a little money upfront and creates real problems later.
How long does an entry door installation take?
Most single entry door replacements in Westchester are completed in four to six hours on installation day. If we’re adding sidelites, replacing a frame with rot damage, or working through a masonry wall with specialized anchoring, the job may run a full day. We’ll give you a realistic time estimate before the crew arrives so you can plan accordingly – no vague “sometime between 8 and 5” windows.
Is a fiberglass door better than steel for a Westchester home?
For most Westchester homeowners, fiberglass – particularly a product like Therma-Tru – outperforms steel over the long term. Steel doors are susceptible to rust in South Florida’s humid, salt-air environment, especially on properties close to canals or the bay. Fiberglass holds its finish, doesn’t dent as easily, insulates better, and can be textured to look like real wood without the maintenance that wood requires. Steel is still a solid choice at a lower price point for protected openings under a porch or deep soffit. We’ll walk you through the tradeoffs on-site so you can make an informed call for your specific situation.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westchester since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.